Casquillos de motores Nissan
CA16, CA16DE, CA18, CA18DE, CA18ET, CA18DET, CA20E, CA20S, CD17
| ENGINE BEARINGS – ACL Race Series | ||||
 |
CON ROD BEARING SET |
MAIN BEARING SET |
||
| Part# | Part# | |||
| 4B1630H |
4B1630HX |
5M1633H |
5M1633HX |
|
| Sizes | STD, .025, .25, .50 | STD | STD, .025, .25, .50 | STD |
| Oil Clearance | Standard | + 0.001″ Extra | Standard | + 0.001″ Extra |
| Half Type | Identical Halves | Upper & Lower | ||
| Material |
Tri-metal Hardened steel backs |
Tri-Metal | ||
| Min Std Shaft Size |
1.7701in / 44.961mm |
2.0847in / 52.951mm |
||
| Max Std Shaft Size |
1.7701in / 44.961mm |
2.0852in / 52.964mm |
||
| Min Std Tunnel Size |
1.8898in / 48mm |
2.2305in / 56.654mm |
||
| Max Std Tunnel Size |
1.8903in / 48.013mm |
2.231in / 56.667mm |
||
| Max Wall at Crown |
0.0593in / 1.505mm |
0.0587in / 1.492mm |
0.0720in / 1.830mm (1633H) |
0.0715in / 1.818mm (1633HX) 0.0717in / 1.823mm (1635HX – Flange) |
| Max Overall Length |
0.7323in / 18.6mm |
0.787in / 20.00mm (1633H/HX) 1.100in / 27.95mm (1635H/HX – Flange) |
||
| Notes | ||||
Diagram |
 |
1633H & HX – Positions 1, 2, 4, 5
1635H & HX – Position 3
|
||
| Part# | NA | Material | NA | |
| Sizes | NA | Notes | NA | |
SR20DE y SR20DET (no GTi-R)
| ENGINE BEARINGS – ACL Race Series | ||||
|
CON ROD BEARING SET |
MAIN BEARING SET |
||
| Part# | Part# | |||
| 4B2960H |
4B2960HX |
5M2964H |
5M2964HX |
|
| Sizes | STD, .025, .25 | STD | STD, .025, .25, .50 | STD |
| Oil Clearance | Standard | + 0.001″ Extra | Standard | + 0.001″ Extra |
| Half Type | Identical Halves | Upper & Lower | ||
| Material |
Tri-metal Hardened steel backs |
Tri-Metal | ||
| Min Std Shaft Size |
1.888in / 47.956mm |
2.1636in / 54.956mm |
||
| Max Std Shaft Size |
1.8887in / 47.974mm |
2.1646in / 54.980mm |
||
| Min Std Tunnel Size |
2.0079in / 51.000mm |
2.3206in / 58.944mm |
||
| Max Std Tunnel Size |
2.0084in / 51.013mm |
2.3216in / 58.968mm |
||
| Max Wall at Crown |
0.0592in / 1.503mm |
0.0587in / 1.490mm |
0.0780in / 1.980mm |
0.0774in /1.967 mm |
| Max Overall Length |
0.673in / 17.10mm |
0.752in / 19.10mm |
||
| Notes | ||||
Diagram |
 |
 |
||
| THRUSTWASHER SET | ||||
| Part# | 1T2964 | Material | Copper Lead | |
| Sizes | STD | Notes | Identical Halves | |